Vapvana logo
Vapvana logo

All articles

How do I setup my Ace kit?Updated a month ago

Ace Kit Step-by-Step Assembly

Follow these five steps carefully to assemble your Ace station. This precise assembly ensures stability and safety for every session.

Step 1: Place Your Dugout Dock

Position the Wooden Dugout Dock on a stable, flat, and heat-resistant surface. This will be the command center for your sessions.

Step 2: Assemble the "Hot Hole" Unit & Heater Post

  1. Take the Heating Coil Assembly ("Hot Hole") and locate the small set screw on its metal base. Use the included tool (Allen key) to loosen it slightly.
  2. Take the metal mounting post and screw the threaded end into the hole in the Hot Hole's base.
  3. Insert the Heating Coil Assembly onto the mounting post.
    1. Important: Orient the unit so that the coil itself faces away from the main body of the Dugout Dock once installed. This protects the wood and keeps the hot coil safely positioned.
  4. Use the included tool to firmly tighten the set screw, securing the coil assembly to the mounting post. The unit should now be one solid piece.
  5. Next, screw the separate Heater Stand Post into the other threaded hole on the dock. This post serves as a safe place to rest your hot Ace heater if needed.

Step 3: Connect to Power

  1. Now that your station is securely assembled, connect the cable from the Heating Coil Assembly to the 5-pin port on the front of your Digital Temperature Controller (PID).
  2. Plug the PID Power Cable into the back of the PID, and then connect it to a wall outlet.

Step 4: Power On & Set Your Temperature

  1. Turn on your PID by holding the middle button for 3 seonds. The display will light up.
    1. Important: If this is your first time powering it on, we recommend doing a 'burn off' at 600f for 15 minutes with the Ace heater inside the Hot Hole.
  2. Use the arrow buttons to set your desired temperature. For your first session, we recommend a starting temperature between 525°F - 555°F (274°C - 290°C). This range is excellent for preserving delicate terpenes and delivering incredibly flavorful hits.
  3. Gently place the cordless Ace Heater into the now-installed "Hot Hole." It should sit securely inside the coil.

Step 5: Heat Soaking (The Key to Consistency)

Allow the Ace Heater to sit in the powered-on coil for 5-10 minutes before your first use. This "heat soaking" process ensures the entire titanium housing and all the internal rubies reach a stable, even temperature - critical for the powerful and consistent vapor Vapvana is known for.


Congratulations! You've now setup for your first Ace experience. Welcome to the ultimate flower & concentrate experience.

Remember, your Vapvana Ace is Built For Life and backed by our lifetime warranty. We're here to support you on your journey to the perfect vapor.

Was this article helpful?
Yes
No